RRC1130
Li-Po standard battery pack RRC1130 (1S1P)
with 3.80V / 3.81Ah / 14.47Wh
- Worldwide approvals and certification of safety standards
- No development costs, fast time-to-market
- Smart LiPo battery with numerous features and I2C communication
- State-of-the-art lithium-polymer cell with the market’s highest energy density
- High discharge performance
- JEITA charging profile optimization
- Numerous and redundant safety features
- Increased ESD protection up to 8.00kV
- Life expectancy: Up to 80% of initial capacity after 800 cycles
Are you looking for more information?
RRC1130
| General | |
|---|---|
| Delivery status (battery capacity) | <30% |
| Operating temperature | 0°C to 45°C (charge) -20°C to 60°C (discharge) |
Storage temperature | -20°C to 60°C max. |
Compliance information | IEC 62133 / CE / UL2054 / FCC / UKCA / PSE / KC / BSMI / GOST-R / CMIM / CCC / RCM / BIS / TISI / UN 38.3 / RoHS / REACH |
Communication bus | I²C |
| Electrical Parameters | |
|---|---|
Nominal voltage | 3.80V |
Nominal capacity | 3.81Ah |
Initial impedance | <60mΩ @ 1kHz at 25°C |
Max. charge current | 2.40A |
Max. charge voltage | 4.35V |
Cont. discharge current | 3.00A |
Battery cell configuration | 1S1P |
Battery chemistry | Lithium Polymer (Li-Po) |
| Battery Dimensions | |
|---|---|
Length | 83.95mm ±0.25 |
Width | 61.23mm ±0.20 |
Thickness | 6.73mm ±0.10 |
Weight | 65g |
Contacts | - , SDA (NTC), +, SCL |
| Ingress protection | IP40 |
| Safety Features | |
|---|---|
CUV (Cell Under Voltage) | Protection against deep discharge |
COV (Cell Over Voltage) | Protection against over charge |
FLATPAQ RRC1130 is approved worldwide
RRC1130
Are you looking for more information?